PX2816B Protocol Exerciser
Data Transmission• Interface: USB Type-C• Throughput: Up to 5GbpsSolid-State Drive (SSD) Storage Support• Users need to purchase and install a compatible M.2 2280 PCIe Gen3 to Gen5 SSD.• The SSD is...
Data Transmission
• Interface: USB Type-C
• Throughput: Up to 5Gbps
Solid-State Drive (SSD) Storage Support
• Users need to purchase and install a compatible M.2 2280 PCIe Gen3 to Gen5 SSD.
• The SSD is used only in LA/PA logger mode, and its file system adopts Microsoft exFAT
technology for storing large amounts of data.
8-Channel Exerciser POD Options: MIPI I3C, IC, UART
• Capable of simulating protocol signals on up to 8 channels, and can be configured as either a Controller or Target device.
• Can edit topology of internal devices, where each device has separate settings.
• Can edit bus output voltage and operating modes (Pull up/down, etc.).
• Controller Mode Simulation
− Provides Quick settings (Template) for rapid script generation and editing.
− Provides Design wizard for editing transmission protocol data.
• Target Mode Simulation
− Supports different Target types in various different communication protocols.
• SDK Mode
− Supports Python Automation control API and examples.
• Logic Analysis/Protocol Analysis Functions
− Maximum sampling rate 2GHz.
− When using with exerciser, can simultaneously observe signal waveforms and analysis results.
− Can be used independently as logic analyzer or protocol analyzer.
− Includes communication protocol decode and protocol analyzer functions.
− Supports real-time Live Mode decoding.
− Can view decoding and packet statistics reports while transmitting protocol data.
16-Channel Logic Analyzer / Protocol Analyzer (Optional)
• Supports Acute 16-channel LA/PA POD.
• Supports various Protocol Trigger/Decode functions.
Power Supply and Power Consumption Measurement
• Provides one set of Power Supply (DC) output, configurable 0.1V - 5V DC output.
• When using power supply, can simultaneously measure power consumption.
General Purpose Input/Output (GPIO)
Provides two sets of GPIO outputs, configurable as Reset signal or general I/O control.
| Protocol | Speed | Vdd | Pull-Up Resistance | Internal Devices |
| I2C | 50KHz~1000KHz | 1.8~5V | 100~100KΩ |
4 (Controller + Target) |
| MIPI I3C | 0.1MHz~13MHz | 1.2~5V | 100~100KΩ |
4 (Controller + Target) |
| UART | 110~921600 bps | 1.8~5V | N/A | 1 |
Packing List:
Device
PX2816B unit
PX-POD Grippers
18.5cm Lead Cable
Power Adapter (PD, 15V/3A)
Stack cable
Exerciser POD
PX-POD
18.5cm Lead Cable
Grippers
Additional Information
Included Items:
- DG4000 Main unit
- DG-Pod
- Event-Pod
- OE-Pod
- USB 3.0 Cable
- Flying Lead Cable
- BNC to MCX
- Grippers
- Adapter / Power cord
System Requirements:
- USB 3.0 port
- 8GB PC RAM (min), 16GB (recommended)
Supported Operating Systems:
- Windows 7/8/10/11 (64-bit)